REGULATOR NECK BAND
![](/img/m/540.jpg)
Elastic rubber band for fixing the emergency regulator to the neck. Easy to locate and can even keep the second stage fixed to the mouth in an emergency situation.
M25 TWIN RIGHT VALVE WO/ CAP 232 B
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.
TWIN RIGHT VALVE BLACK M25 232 BAR WITHOUT CAP
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
ON/OFF REGULATOR VALVE LONG FLOWSTOP
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
TWIN LEFT VALVE BLACK M25 232 BAR WITHOUT CAP
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
ALUMINIUM TEK GOODMAN HANDLE ADJUSTABLE
![](/img/m/540.jpg)
TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.
ON/OFF REGULATOR VALVE SHORT
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm
VITON O-RINGS (14 Sizes)
![](/img/m/540.jpg)
O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure.
ALUMINIUM GOODMAN HANDLE ADJUSTABLE
![](/img/m/540.jpg)
TDS Goodman handle made of lightweight anodized aluminum. The height of the handle is adjustable by lateral screws (including a spare one), allowing it to be adjusted to the size of our hand and / or to use with or without gloves. These screws are adjusted using an allen wrench included with the handle.
LEFT TWIN VALVE CAP
![](/img/m/540.jpg)
Modular side right-type valves cap, to close the side exit to exit manifold or modular plug.
WRIST WET NOTE
![](/img/m/540.jpg)
Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.
RIGHT TWIN VALVE CAP
![](/img/m/540.jpg)
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug.
WET NOTE CORDURE COVER
![](/img/m/540.jpg)
TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.
POCKET W/ CARABINERS & CUT SYSTEM
![](/img/m/144.jpg)
BACKPLATE WEIGHT POCKET 4.5 KG (Pair)
![](/img/m/540.jpg)
Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.
M25 VALVE 1 EXIT 300 BAR VALVE
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.
BATTERY FOR MARU 1500 USB-C LIGHT (18650)
![](/img/m/540.jpg)
TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
BATTERY FOR KAVE 2000 USB-C LIGHT (26650)
![](/img/m/540.jpg)
TDS 26650 lithium battery USB-C for Kave 2000 diving light: Ion-Lithium battery 26650 USB-C type, compatible with TDS Kave 2000. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
S80 STAGE TANK HARNESS
![](/img/m/540.jpg)
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
3/4 GAS VALVE 1 EXIT
![](/img/m/540.jpg)
Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.